Sign up for free trial
Sign up and experience the power of Exebenus technology
ROP optimization agent reduces drilling time in offshore development side-track well
An operator’s planned side-track drilling project offered a perfect location for the latest machine learning agent from Exebenus. Facing a drilling environment known to cause slow performance, the operator hoped to uncover consistent and reliable ways to improve ROP. The Exebenus Current ML™ Real-Time ROP Optimization agent’s multivariate optimization while drilling did in fact provide the rig crew with the desired insight, enabling them to decrease drilling time and cost.
Improve drilling time in an environment known for slow ROP
An operator with a development well in Malaysia needed to drill a side-track to reach the gas reservoir. The field’s offshore environment is characterized by interbedded claystone and sandstone, known to result in slow ROP and added cost.
The operator decided to conduct a fi eld trial of the Exebenus Current ML™ Real-Time ROP Optimization agent to fi nd out if it would improve and optimize drilling.
Specifically, the operator wanted to know if the way in which the information is provided to the rig crew would be easy to understand and implement, and if the real-time drilling parameters provided by the agent would help the crew to reduce drilling time. Longterm, the operator hoped that the insight and experience gained by the crew would be effective in improving drilling times in future projects in the same fi eld and depth zone.
Real-time ROP optimization agent is put to the test
The field trial was performed in the 12 1/4 in section with a maximum inclination of 85 deg using a rotary steerable system BHA and a polycrystalline diamond compact bit.
The operator established guidelines for the fi eld trial. They wanted to see if the optimization agent’s drilling recommendations were reasonably consistent with the drillers’ existing roadmap, and with typical operational constraints, the well complexity, common drilling practices and technical limitations.
The rig crew was asked to act on the advice of the agent only when the recommended ROP was significantly higher than the baseline ROP, and only as long as the advice did not pose risks to equipment or operational safety.
The agent provides updated recommendations on drilling parameters every 50 cm of drilling, but to comply with the established communication guidelines, the real-time operations (RTO) team only advised on changes in drilling parameters two or three times per stand based on trends in the recommendations.
ROP increases significantly, and no stuck pipe issues
As the rig crew started to follow the recommendations of the agent, the ROP increased from 6 m/hr to 25 m/hr. However, gaps between the actual and recommended ROP were observed, indicating parameters could be further optimized. The team continued to follow the agent’s recommendations by increasing weight on bit from 1 klbm to 5 klbm, RPM from 128 to 140, and mud fl ow from 750 gpm to 850 gpm, resulting in an ROP of 31 m/hr. Reviewing the drilling of the 12 1/4 in side-track section between 1244 m to 1380 m, the agent’s advice resulted in a significant increase in ROP from 10.4 m/hr to 31 m/hr.
The Exebenus Current ML™ Stuck Pipe Hole Cleaning agent was deployed to support the ROP agent, since running at a higher ROP can lead to hole cleaning issues and a higher risk of stuck pipe. No hole cleaning issues and no downhole losses were observed.
The rig crew was very happy with the setup and the information the agent provided. Crew members gained better understanding and confidence in their actions.